Drafting Order Form

Format - JN####-XXX-Your Job Name
New Job - With 1 Room
Kitchen
- - Please Note - - 
 The details you provide on this form will be specifcally for this room ONLY. Where a Job has more than 1 room to be drafted, a new form needs to be submitted for each room.
e.g. JOHNSON NORTH SYDNEY
(Appears in Tiltle Block)
(Appears in Drawings Title Block)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Introduction to Cabinet Groups
 (Base - Upper - Tall)

- - Please Read This Information Very Carefully Before Continuing - -  To begin entering a job we need to create default settings specific to the Job. As displayed above, all cabinets & panels are categorised into 3 groups (Base - Wall - Tall). This enables us to define default settings for each group such as size, material, colour, etc.  

- For ease of identifying the groups we have colour coded them as shown above.Where a Job is being drafted to produce drawings for presentation, we also need to enter exact wall dimensions as well as room settings such as ceiling heights, bulkhead and kickboard heights, as these dimensions affect the finished heights of the cabinets and panels.

 Note: It is important to set this information up correctly at the start particularly if you are planning to convert these drafted plans into CNC production files. While it is possible to modify these settings once drawn, it  potentially lead to errors in manufacturing and can be as time consuming as fully re-drawing.
Please advise the type of drafting service you require
Clear choice
Please select
- If Required - Add additional information here . 
(e.g. Cabinets 4 & 5 in my drawing to be supplied flat pack as they are too large to fit through doors)

Basic Elevation Dimensions for Order Entry

Detailed Elevation Dimensions for Drawings

Carcass Sizes - For Each Cabinet Group - Please enter the finished Carcass Sizes

`
[B] Base Cabinets
For values that are not applicable - Enter 0
`
[U] Upper Cabinets
`
[T] Tall Cabinets
Please select
- If Required - Add additional information here to highlight points in your drawings.
  e.g. Base cabinets on Wall 2 in my plans are 450 deep   
  e.g. Use Plinths for Island cabinets and Legs everywhere else
  e.g. Ceiling is raked  with lowest point 2200 highest point 2500 - See drawings

Drawing Detail

[KB] Kick Board Height
NOTE: Relevant Carcass Heights will be Reduced by this Value
[BT] Bench Top Height
(Only Affects Presntation in Drawings - No Impact on Sizes)

Room Detail

[C] Ceiling Height
Required for Alignment of Upper Cabinets
[S] Sofit Height 
 (Bulkhead )
Required for Alignment of Upper Cabinets
(Usefull Only for Full Kitchen Drawings)
Select allClear choices
WARNING-Top of Upper & Tall Cabinets Mis-Alignment
Unless on Purpose, Please Adjust ~ Height of Ceiling or Height of Sofit or Height of Tall Cabinets ~ by the Discrepency Value to Rectify.
Note : The Upper Cabinets Alignment with Tall Cabinets will be Out by this Value if You Continue.
Based on Ceiling and Sofit Height
(Excluding Kicks)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Cabinet Settings

For Each Cabinet Group - Enter the Carcass and Door Material Information

Note: The Information entered for the Base Cabinet Group will automatically apply for Upper and Tall Cabinet Groups, unless altered below.

Base Cabinet Group

Base Cabinets - Carcass Settings

Select the required Carcass Material and Edge Banding Colour, Followed by the Carcass Style
Please select
Please select
Specify : (Brand - Color - Finish)
Standard Edge Banding - Matching Board
Specify : Details for edge banding the Base Carcass Parts
30mm Default
30mm Default

Base Cabinets - Door & Panel Settings

First Select a Door Group then Select a Door Style
Please select
Please select
Please select
Please select
e.g. Veneer, Plywood, Tricoya Board, etc
Please select
e.g. Polytec - Natural Oak - Ravine Finish
e.g. Dulux - Vivid White - Satin Finish
For Shaker Usually 60mm
For V Grooves Approx 100mm
For Shaker Usually 4mm
For V Grooves Usually 2.5mm
Clear choice
Explain how the Base Cabinet End Panels are Different
- If Required - Add additional information here for Base Cabinet Carcass and Door.(eg. Use 25mm White HMR Shelves etc)

Upper Cabinet Group

Upper Cabinet - Carcass Settings

For the Upper Carcass - Choose to use the same settings as Base Cabinet Group or select New Carcass Settings
Clear choice
Select the required Upper Cabinets Carcass Material and Edge Banding Color, Followed by the Carcass Style
Please select
Please Select
Specify : (Brand - Color - Finish)
Standard Edge Banding - Matching Board
Specify : Details for edge banding the Base Carcass Parts
20mm Default

Uper Cabinets - Door & Panel Settings

Clear choice
First Select a Door Group then Select a Door Style
Please select
Please select
Please select
Please select
Please select
e.g. Veneer, Plywood, Tricoya Board, etc
e.g. Polytec - Natural Oak - Ravine Finish
e.g. Dulux - Vivid White - Satin Finish
For Shaker Usually 60mm
For V Grooves Approx 100mm
For Shaker Usually 4mm
For V Grooves Usually 2.5mm
Clear choice
Explain how the Upper Cabinet End Panels are Different
- If Required - Add additional information here for Upper Cabinet Carcass and Door.(eg. Use 25mm White HMR Shelves etc)

Tall Cabinet Group

Tall Cabinets - Carcass Settings

For the Tall Carcass - Choose to use the same settings as Base Cabinet Group or select New Carcass Settings
Clear choice
Select the required Tall Cabinets Carcass Material and Edge Banding Color, Followed by the Carcass Style
Please select
Please select
Specify : (Brand - Color - Finish)
Standard Edge Banding - Matching Board
Specify : Details for edge banding the Base Carcass Parts

Tall Cabinets - Door & Panel Settings

Clear choice
First Select a Door Group then Select a Door Style
Please select
Please select
Please select
Please select
Please select
e.g. Veneer, Plywood, Tricoya Board, etc
e.g. Polytec - Natural Oak - Ravine Finish
e.g. Dulux - Vivid White - Satin Finish
For Shaker Usually 60mm
For V Grooves Approx 100mm
For Shaker Usually 4mm
For V Grooves Usually 2.5mm
Clear choice
Explain how the Tall Cabinet End Panels are different
- If Required - Add additional information here for Tall Cabinet Carcass and Door.(eg. Use 25mm White HMR Shelves etc)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Hardware Selection

Please Note - We do not offer the option of Partial Hardware Supply
Clear choice

Hinge Hardware

Please select

Push To Open Doors

Please select
e.g - Fridge and Rangehood Cabinets Only OR Use Push Catch on Pantry Cabinet

Drawer Runner System - Drawer Bays

Please select
e.g. - Use D Height Drawers for All Pot Drawers in Plan

Drawer Runner System - Internal Drawers

Please select
Please select
e.g. - Leave 50mm Gaps between faces where possible

Handles (for Display on Drawings Only - NO HANDLE DRILLING)

Please select
Default - Verical Placement on Doors - Horizontal / Centered for Drawers
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Appliance Specs

Range Hood

Please select
Please select
Yes
Make & Model No. (if Known)

Cook Top

Please select
Please select
Make & Model No. (if Known)

Oven

Please select
Please select
Please select
Make & Model No. (if Known)

Microwave

Please select
Make & Model No. (if Known)

Dish Washer

Please select
Please select
Make & Model No. (if Known)

Refrigerator

Please select
(1850 Default)

Appliance Spec-sheet Uploads

Please Upload any Appliance Specs You have available
Delete all uploads
Choose files or drag here
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Final Items Check List

Kick Boards

Please select

Bulkheads

Please select

Shadow Rails

Please select

Final Notes

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Plans & Drawings

Attachments

Attach Plans / Sketches of your Job with All Wall and Cabinet Dimensions.
Delete all uploads
Choose files or drag here
- Upon Submission of this form our staff will look over the information provided and commence drafting in accordance with the details provided.

 - Where information is found to be missing or unclear the process will be put on hold untill we are able to contact you to clarify (this can add days to the process as we will move onto other jobs in the meantime, so please provide as much detail as possible at this stage)

- Please provide details below for the best form of  contact should we need additional information relating to the plan.
e.g. - Please call between 9 & 3 if required.or   OR   I am only available by email
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20