01. Your Contact and Vehicle Information
02. Front Wheel Measurements
03. Rear Wheel Measurements

3030 Autosport Vehicle Measurement Form

All Fields Required to Best Recommend Fitment and Contact You. No Spam, No Hassles. Just a Great Fitment
List all suspension changes, brake upgrades, body mods...etc.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
01. Your Contact and Vehicle Information
02. Front Wheel Measurements
03. Rear Wheel Measurements

Measurements for Front Wheels:

Measure both Driver and Passenger Sides and enter the lower measurement of the two.
Dimension A - Measure at ride height.
Dimension B - Measure at the point the tire or wheel would make contact.  For example, when measuring for 18" wheels, measure at a level 9" hub from the center of the hub. Likely a coil-over.
Dimension C - How far does the face of the caliper protrude from where the wheel sits?  Sometimes it sits behind of the mounting surface - in that case - enter "NEGATIVE Protrusion"

OR: If you have the part # for the brake kits you installed, list the brand and part #. We will likely have the manufacturer's dimensions.
Dimension D - Measure from center of hub to the outermost edge of the brake caliper including fittings if applicable.

OR: If you have the part # for the brake kits you installed, list the brand and part # like above.
Dimension E - Measure from center of hub to the innermost edge of the brake caliper.

OR: If you have the part # for the brake kits you installed, list the brand and part # like above.
Dimension F - Best measured with a micrometer.
Dimension G - Measure from Mounting Surface to the hub of the register.
Dimension H - Measure from Mounting Surface to the top of the spindle / Dust Cap.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
01. Your Contact and Vehicle Information
02. Front Wheel Measurements
03. Rear Wheel Measurements

Measurements for Rear Wheels:

Measure both Driver and Passenger Sides and enter the lower measurement of the two.
Dimension A - Measure at ride height.
Dimension B - Measure at the point the tire or wheel would make contact.  For example, when measuring for 18" wheels, measure at a level 9" hub from the center of the hub.  May be a coil-over, exhaust, frame or inner wheel well.
Dimension C - How far does the face of the caliper protrude from where the wheel sits?  Sometimes it sits behind of the mounting surface - in that case - enter "NEGATIVE Protrusion"

OR: If you have the part # for the brake kits you installed, list the brand and part #. We will likely have the manufacturer's dimensions.
Dimension D - Measure from center of hub to the outermost edge of the brake caliper including fittings if applicable.

OR: If you have the part # for the brake kits you installed, list the brand and part # like above.
Dimension E - Measure from center of hub to the innermost edge of the brake caliper.

OR: If you have the part # for the brake kits you installed, list the brand and part # like above.
Dimension F - Best measured with a micrometer.
Dimension G - Measure from Mounting Surface to the hub of the register.
Dimension H - Measure from Mounting Surface to the top of the axle sticking out.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20