ESD Testing Request
Company Name
Contact Name
Telephone
Fax
Email
PO Number
Number of Test Units
Part Number
Package Type
Turnaround Time
Standard
Expedite
1
Required Test and Standard
HBM MIL-STD-883
HBM JEDEC Std
HBM ESDA STM 5.1
HBM AEC-Q100-002
MM JEDEC-Std
MM ESDA STM 5.2
MM AEC-Q100-003
CDM JEDEC Std
CDM ESDA STM 5.3.1
CDM AEC-Q100-011
Customer Test.
Number of Device Pins
(includes no connections)
Number of No Connection Pins
Please Indicate Power Supply and ground groups that require to be tied separately
Please specify the voltage and the number of devices for each voltage:
(Normally used three devices for each voltage step)
Number of test pulses:
Interval between pulses:
Are both polarities required?
Yes
No
Is curved tracing of the pins required to determine pass/fail?
Note: If curve tracing is required it should only be used as an indication that the pin I/V characteristics have changed. Curve tracing should NEVER be used in defining pass/fail criteria for qualification of a device. Both Mil Std. and JEDEC specify that only electrical test be used to determine whether the device has passed ESD testing.
Yes
No
If curve trace is required please specify (ICE normally uses 10% change in the I/V characteristics as the fail criteria):
Force current/voltage to:
(ma) to (va)
Limit current/voltage to:
(ma) to (va)
What is the fail criteria?
%
Send Email
You already reached the maximum number of accepted choices